What a joinery shop drawing has to show
Joinery drawings, joinery shop drawings, joinery detail drawings, cutting lists (the list, not the drawing — kept distinct on this page, since the two get conflated).
Slatlyn Drawings takes the 3D geometry already in your model — one joinery component or a full assembly — and produces a dimensioned shop drawing from it: the view that shows the piece correctly, a scale chosen from a fixed ladder up to 1:100, dimensions placed and sized by fixed rules, and a title block. A component that will not read clearly on one sheet is split across full sheets rather than squeezed to fit. A cutting list, where the product generates one, is a separate output from the drawing itself — the drawing is what a bench reads; the list is what a cutting station reads.
Specimen sheet
A real shop drawing, produced by Slatlyn Drawings from an actual component's own STEP geometry — the view choice, the scale, the placed dimensions and the title block below are exactly what the service drew, watermark aside — the same watermark you see before you download a real drawing of your own.
What this is, plainly
The drawing is produced from your own uploaded model, automatically, by fixed documented rules — deterministically, so the same model and settings produce the same drawing every time. It is not a design service: Slatlyn Drawings does not design the joint or the piece, and it does not check standards compliance. What is drawn is what is in your model. Checked and released by you. All drawings are working aids — check and release them yourself, with a qualified person, before they reach the bench.
Positioning
Timber and joinery are the trades this is built for — the one built for timber and joinery, not a general mechanical-parts tool adapted afterwards.
Frequently asked questions
Is the service a drafting agency, like the ones that come up in search?
No — nobody drafts the piece for you by hand. The drawing is produced automatically from your own 3D model by fixed rules. No person drafts anything per order.
What do I need to have ready?
A STEP file with your own 3D geometry — a single part or a full assembly.
Does the service produce a cutting list as well as the drawing?
Where a cutting list is generated, the list and the drawing are separate outputs. The cut-and-material-data feature page says what the list covers.
Try it now, free
Upload a CAD file and see the dimensioned preview at once, free, with no account; you pay only on download.