One sheet per part
Every part in the job is drawn on its own sheet. A ten-part assembly comes back as ten sheets, each with the part dimensioned and a title block — a complete set for you to check and release to production.
Paper and scale, chosen automatically
The paper size and the scale are picked from fixed ladders so the part fits and stays readable. Scale runs up to 1:100, never an odd fitted value, and the paper climbs its family — ISO from A4 to A0, or US from ANSI A to ANSI E — until the drawing fits.
You can pin the paper yourself
By default every size in the chosen family is allowed and the layout climbs through them. If you prefer, you can narrow the allowed sizes or pick one, and a part that no longer fits is reported plainly rather than squeezed.
Drawings in 13 languages
The title block and the view labels appear in the language you choose — German, English, Spanish, Italian, French, Russian, Portuguese, Norwegian, Swedish, Finnish, Czech, Polish or Dutch. The printed verification notice is separate: it always carries the same two fixed wordings, German and English, whatever language the drawing itself is in, so the sentence stays readable in any workshop the sheet reaches.
Common questions
How is the paper size decided?
Automatically. The layout starts on the smallest allowed sheet and climbs its family — A4 to A0, or ANSI A to ANSI E — until the part fits at a readable scale.
Which scales are used?
A fixed ladder up to 1:100. The layout never invents an odd scale to make something fit.
Can I choose the paper myself?
Yes. You can allow only certain sizes or pin a single one. A part that does not fit the sizes you allow is reported, not forced onto the sheet.
What if an allowed paper size only shows the drawing coarsely?
The shortfall is never hidden. A drawing whose details stay unreadable under the chosen settings carries a note on the job page. The note names a cure proven by drawing the part again. The cure can be more ticks under “Allowed scales”, “Landscape only” unticked, or a larger paper size. A larger size is named only where one draws the part readably, with a link to the job settings. A drawing at full detail carries no note.
Which paper sizes should I allow?
A new job starts with only the family's two smallest sizes allowed — A4 and A3 for ISO, ANSI A and ANSI B for US — because that already suffices for most parts, and no part lands on an unnecessarily large sheet without a reason. An account's own already-saved default is left exactly as saved. When a larger size draws a part readably, the note with the drawing names the size. On the “Paper” tab of the job settings, the size is allowed with one click.
Which drawing languages are there?
Thirteen: German, English, Spanish, Italian, French, Russian, Portuguese, Norwegian, Swedish, Finnish, Czech, Polish and Dutch. The upload form lists them by their own native name (Deutsch, English, Español …) in a compact “Drawing language” picker.
How does the service know which language to draw in?
The upload form's own “Drawing language” picker decides for that one job and always wins. Left untouched, it opens on your account's own drawing-language setting if you saved one on your Account page, otherwise on this page's own language. An anonymous job with no explicit choice draws in the language of the page it was uploaded from.
Why does my drawing carry German and English?
So the verification notice stays readable wherever the sheet goes, and so that every sheet carries the same sentence. German is the master wording and English is the translation of it, checked against the German clause by clause and held there by a test; both are fixed sentences, never a machine translation done at runtime. The other eleven translations exist but are drafts, and a draft is not printed.
A part shows "multiple sheets" — what does that mean?
The part is too large or too detailed for a single sheet of the allowed paper family, so it is spread over several complete sheets, each with its own "sheet x of y" line. Its tile then carries a small badge naming the sheet count, and the preview shows the previous and the next sheet at its left and right: a click on one, or the left/right arrow keys, turns the page like a book; the up/down arrow keys move between parts, the way the list stands. The part still comes back as one DXF and one PDF: in the DXF the sheets are its layouts, in the PDF they are its pages.
Does the verification notice print in more than two languages?
No — the footer holds two lines, and they are always the same two: German and English. Those are the only two wordings that are finished, and only a finished wording prints. A drawing in any of the other eleven languages carries that same German and English pair; its own language is not printed in the notice, because its translation is still a draft.
Why did my part come back at a finer scale, or on more sheets than I expected?
Because a readable sheet that leaves its paper mostly empty is given the next finer scale, where that scale still fits the paper. The test is the drawing's own ink extents rather than a percentage: a genuinely full sheet is left as it is. Sometimes the same single sheet carries the finer scale, sometimes it costs a second one. Only a layout on which every sheet reads is chosen, and all sheets of one part keep the same scale — unless holding them all at one scale would make a sheet unreadable. Then readability wins, and the sheet says so.
What are the extra, non-standard scale steps?
The ISO ladder has wide gaps — 1:10 straight to 1:20, 1:20 to 1:50. A part that just misses one costs a larger sheet or a second one. So you can allow five further fixed steps: 1:3, 1:4, 1:15, 1:25 and 1:30. The ladder stays fixed and finite — an odd fitted value is never invented, and the step used is printed in the title block as always. “Allow extra scale steps (not ISO)” is in the “Settings”, “Paper” tab, under “Allowed scales”, and is off unless you tick it; ticked, “Allowed scales” offers the five steps as well. A drawing on one of these steps is a valid drawing — but if you have to hand ISO-conforming sheets to a third party, leave it off.
Try it now, free
Upload a CAD file and see the dimensioned preview at once, free, with no account; you pay only on download.