Settings

Settings are read-only in the sample.

Title block: changes re-print the finished sheets; nothing is drawn again. Drawing and Paper: changes re-draw the job.

Title block

The title block as printed.

Job — this job only

The project the job belongs to. 1 of 7 lines

The client the drawing is for. Up to 7 lines.

The plan number, yours to overwrite.

The revision index, yours to overwrite.

Suggestion

The plan date, yours to overwrite.

Contractor and address. 1 of 7 lines

A named person, not an office. Up to 7 lines.

Views, title block, notice and file names.

Each sheet fills in part, quantity, position, date, scale, sheet and format itself.

Logo

none

Your own line at the foot of the title block.

Title block questions
Which values come from the account, which from the job?

From the account come “Company”, “Planner”, “Drawn” and the drawing language; every other value belongs to the job. “Apply defaults” brings the defaults into the job, “Save as default” writes the job's values to the account.

Why do “Client” and “Project” have no default?

Both belong to the single job; a default would print one job's client on the next. Instead, the values used last appear while you type.

How do the defaults reach a running job?

Not by themselves: in the job's title block, “Take over defaults” brings them in and prints the block again. The other way round, “Save as default” writes a job's values to the account.

What happens when the drawing language changes?

Only the lettering changes: views, block fields, notice and file names; in the account, the language applies to new jobs. On a drawn job, the service prints every sheet again; the re-print costs nothing, only the download is paid for.

Which logo files are printed?

DXF and SVG as lines, PNG and JPEG as a picture. PDF and SVG carry the picture inside; the DXF refers to logo.png, which comes with the download.

When does a changed title block reach the sheets?

Changed on the job, previews and files print again; changed in the account, the block serves new jobs. Logo and custom rows reach an existing job only when you redraw the job.

Where does the logo print?

In “Company” at the right edge, at most 20 mm wide, level with the company name. Without a logo the address takes the full width.

How many lines fit a title-block box?

“Company”, “Planner”, “Project” and “Client” take up to seven lines in 2.5 mm text, every other field one line. Long lines wrap; the block grows with the longest entry, by 35 mm at seven lines.

When is the note printed?

Every sheet prints your line or the standard one while “Check line in the title block” is on. The setting sits in the “Drawing” tab, on from the start; the sheet-foot check notice is a separate sentence.

What if a value does not fit its cell?

The title block sets the value one font size smaller, otherwise prints the part which fits, ending in an ellipsis. The form and the preview name the printed part; the whole value is saved.

Why does the preview shrink?

On a phone the window makes room for the screen keyboard. Your entry, its save button and the preview stay visible; the preview gives way first.

Which fields does the title block show?

All: every form entry and everything the service works out itself has its own cell. An empty entry prints its caption, as a workshop title block does.

Drawing again, the title block following, producing the files — which is which?

“Redraw” draws every part again with new values; “Title block follows” prints only the previews' title block again. “Produce files” writes DXF, PDF and SVG at release; when the title block changes later, the files are printed again.

Title block: changes re-print the finished sheets; nothing is drawn again.

Questions

What does “Save as default” do?

Drawing, paper and “Company”, “Planner” and “Drawn” become the default for every new job; running jobs keep their values. “Project”, “Client”, “Plan no.”, “Rev.” and “Date” belong to the job and never become defaults.

Drawing

Change whatever you like and re-draw the same job. The fields are prefilled with this job's current settings.

The parts already read in are reused — nothing is uploaded again and nothing is read in again.

Views

Three or six, as the part needs.

Lines and colours

Only does anything while “Draw projection lines” is ticked.
Projection lines are not drawn.

In the DXF, each line type carries its colour as a layer.

Output

Output format The file format is chosen at the download.

Drawing lettering DejaVu Sans (default), Normal (default) · Change in the account

Drawing questions
Where do the colours sit in the DXF?

On the layer, not the line: dimension lines, hidden edges, outline and projection lines are four layers, one colour each. In CAD, one layer changes every line of its kind at once.

When does the part picture appear on the sheet?

The part picture shows how the part lies and stands at the title block on every sheet except A4 portrait. Where a sheet with room lacks the picture, a note stands at the drawing.

What does the check sentence in the title block say?

The foot of the title block says “All dimensions to be checked on site.” in the drawing language, or your own line from the “Title block” tab. Every sheet prints the line while “Check line in the title block” is on.

Does a new lettering apply to running jobs too?

Yes, at the next drawing or re-print. Finished files do not change by themselves.

Why no font file of my own?

Drawings use the supplied fonts, whose widths are measured exactly; every file looks the same everywhere.

Does the lettering grow on larger sheets?

No: lettering is the same height on every sheet, in fixed millimetre steps set by the chosen text size. A scaling with page size chosen earlier no longer applies.

Drawing again, the title block following, producing the files — which is which?

“Redraw” draws every part again with new values; “Title block follows” prints only the previews' title block again. “Produce files” writes DXF, PDF and SVG at release; when the title block changes later, the files are printed again.

What does “Save as default” do?

Drawing, paper and “Company”, “Planner” and “Drawn” become the default for every new job; running jobs keep their values. “Project”, “Client”, “Plan no.”, “Rev.” and “Date” belong to the job and never become defaults.

Paper

Format family

Allowed sheets

Each part goes on the smallest ticked sheet with readable details.

Landscape

Allowed scales

With nothing ticked the whole ladder applies; a fixed scale always applies.

Parts

Parts Draw identical parts once: on. Decided at upload; a re-draw keeps the setting.

Paper questions
Allowed sheets and allowed scales — how do they work together?

Each part goes on the smallest ticked sheet where the part is readable. Otherwise the part takes the largest allowed sheet and a note; with a single scale ticked, the part stays undrawn.

ISO or US — what does the paper family change?

The sheet range the service picks from: A4 to A0, or ANSI A to E. The other family applies only once you save the defaults.

What becomes of extra scales when I switch them off?

The five extra scales turn grey and cannot be ticked; saving drops their ticks. Switched on again, none of them is ticked.

Which scales may a drawing use?

Only the ticked ones, enlargements included; with no reduction ticked, any reduction may be used.

What does “Landscape only” do?

Ticked, every sheet lies landscape; unticked, every sheet takes the orientation with the larger scale. Where only portrait draws a part readably, the note at the drawing advises removing the tick.

What happens when a part fits no allowed sheet?

Every part which fits an allowed sheet at an allowed scale is drawn, with a cure where details stay unreadable. A part fitting nowhere stays undrawn, and its reason names what would make the part fit.

What does “Draw identical parts once” mean?

Identical shapes, for panels with identical good sides, make one sheet with a quantity; the rule is set at upload. Unticked, each part gets its own sheet; in the download a shape and its mirror image always count once.

Back to the job

The job keeps its id and its deletion date; the new drawings replace the previous ones. Drawing and previewing are free, and a part you have already downloaded is never counted a second time.

Parts you have left out stay left out. A re-draw changes the settings, not your selection — to bring a part back, tick its box again on the job page.

Defaults need an account.

Finished sheets receive the new title block; nothing is drawn again.

Replaces every sheet of the job. Parts already read are kept.

Questions

What happens when settings are saved while a drawing runs?

The drawing stops and starts again with the new settings; parts already read stay, and sheets already drawn are replaced. Only the first download is paid for, as before.

Does a title-block change start the drawing again?

No. Finished sheets receive the new title block, and sheets still to come carry the new block from the start. Nothing is drawn again for a title-block change.

What does a re-draw draw after a stop?

Every part, including those the stop skipped, with the settings then in force.

Why can “Re-draw” sometimes not be chosen?

“Redraw” gives its reason in a line of its own: the parts are still being read in, the package is being put together, nothing has changed on drawing or paper, or there is no part to draw. As soon as the reason clears, “Redraw” can be chosen again.

Does a re-draw cost anything?

No: redrawing and downloading again cost nothing; each part is paid for once, at its first download.

What happens to a package that was already downloaded?

After a redraw, an earlier package no longer matches the settings; the job page names the difference at download. Replaced sheets sit in the same package in superseded_2026-09-24.

Account